How to lay bathroom floor tiles: a hot topic and practical guide on the Internet
Recently, bathroom decoration has become a hot topic in the home field, especially floor tile laying techniques. The following is a compilation of content related to bathroom floor tile laying that has been hotly discussed on the Internet in the past 10 days. It combines practical steps and data analysis to provide you with a detailed guide.
1. Hot topics in bathroom floor tile laying in the past 10 days
| Ranking | Topic keywords | search volume index | Main discussion points |
|---|---|---|---|
| 1 | Bathroom floor tiles anti-slip | 185,000 | Anti-slip coefficient selection, texture design |
| 2 | Small bathroom floor tile size | 123,000 | 300x300mm vs 600x600mm |
| 3 | Color matching of floor tiles | 98,000 | Contrasting color/same color scheme |
| 4 | Thin paste method construction technology | 76,000 | Adhesive thickness control |
| 5 | Ceramic tile loss rate calculation | 54,000 | Comparison of losses in different laying methods |
2. Detailed explanation of the 6 steps for laying bathroom floor tiles
Step 1: Grassroots treatment
• Clean the floor until it is dust-free and oil-free
• Check the integrity of the waterproof layer (closed water test for 48 hours)
• Leveling layer flatness error ≤3mm/2m
Step 2: Elastic line positioning
• Take the doorway as the baseline and extend to both sides
• For small spaces, it is recommended to use the "cross positioning method"
• Reserve 2-3mm expansion joints (5mm is recommended in northern areas)
Step 3: Material preparation
| Material type | Specification requirements | Dosage reference (10㎡) |
|---|---|---|
| Tile glue | C2TE standard | 18-22kg |
| Anti-mildew caulk | ISO 13007 certification | 2.5kg |
| positioning cross | 2mm/3mm specifications | 80-100 pieces |
Step 4: Paving construction
• Use a "serrated trowel" to scrape glue (tooth depth 8-10mm)
• Pave from visible locations to concealed areas
• No stampeding for 24 hours
Step 5: Gap treatment
• Clearance depth ≥ 2/3 brick thickness
• The construction temperature of beautiful seams is 5-35℃
• Epoxy colored sand needs to be used within 30 minutes after mixing
Step 6: Maintenance acceptance
• May be used lightly after 72 hours
• Acceptance criteria:
- Hollow rate ≤ 5%
- Seam height difference ≤0.5mm
- Drainage slope 2%-3%
3. Comparison of mainstream paving solutions in 2023
| Paving method | Applicable scenarios | Labor cost (yuan/㎡) | Material loss rate |
|---|---|---|---|
| Gongzipu | Rectangular tiles | 45-55 | 8%-10% |
| herringbone spelling | Wood grain brick | 80-100 | 12%-15% |
| diamond shop | square tiles | 60-75 | 10%-12% |
| mixed shop | Special-shaped brick combination | 120-150 | 18%-25% |
4. Solutions to common problems
Q1: What should I do if the floor tiles are hollow?
• Partial hollowing: repair with epoxy resin injection
• Large areas of hollows: need to be demolished and resurfaced
Q2: How to prevent discoloration of seaming agent?
• Choose products with good UV stability
• Avoid getting wet for 72 hours after construction
Q3: How to reduce tile cutting loss?
• Using computerized waterjet cutting
• Do layout optimization in advance
Through the above systematic laying guide, combined with current fashion trends and practical data, we hope to help you create a bathroom floor tile project that is both beautiful and practical. It is recommended to make detailed planning before construction and reserve 10%-15% of spare tiles to cope with loss.
check the details
check the details
en
